International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,March 2017,

Topic : Recent Development of Laser Based Treatment on Titanium Alloys: From Coating to Treatment – A Review

Authors: Madhava Selvan V || Ramesh Raju,N Manikandan, Palanisamy D, D Arulkirubakaran

Abstract:The tribological properties, in specific, oxidation and hot corrosion behavior were found to be a dominant property to improve the surface characteristics of titanium alloys and many researchers tried different methods to improve it. In order to achieve a better coating, there are numerous surface treatment techniques have been performed. The techniques, such as nitriding, carburizing, oxidation, physical vapor deposition (PVD) and chemical vapor deposition (CVD) executed to improve the surface properties of titanium alloys. In addition to this, laser was also used in surface modification. The coatings made by laser techniques exhibited strong metallurgical bonding with the substrate materials, owing to their high energy density. It was also found that the technique satisfied the industrial requirements for all applications. .

Keywords: Microhardness, Laser Surface Melting, Laser Metal Deposition, Microstructure, Ti6Al4V

Download Paper


DOI: 01.1617/vol4/iss3/pid08562


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.

Journal Index Databases

IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP OTHER JOURNALS


Subscribe

           Email:

SOCIAL MEDIA