International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,May 2017,

Topic : Fabrication of Solenoid Gear Changer

Authors:Harish babu.L || Devendra Tarun Murugan, Dada Hayath Ali,Jithin Anthony, Kiran R

Abstract:In this study, a gear shifting mechanism was designed and applied to make the shifting process faster and less destructible for the driver. The new device must be reliable, has a small dimensions, low construction and maintenance cost. This paper aims to improve gear shifting process using devices as: a manual four stroke engine bike, two solenoid actuator, Programmable Logic Controller (PLC), limit switches, push buttons, indicators, and power supply. According to suggested gear_ shifting method the control unit chooses optimum gear shifting ratio for an automobile without operating it manually (using relays). Using this method leaves to the driver the excitement of choosing the shifting moment. A solenoid actuated transmission shifting apparatus is provided for temporary or permanent installation in automobiles with conventional, H-pattern-type manual transmissions or automatic transmissions and for use with motorcycle transmissions. The shifting apparatus allows for both upshifting and downshifting through the transmission gears by pressing pushbuttons mounted on the Steering wheel, “handlebar” or dashboard. A solenoid shift actuator for a transmission, which actuates, in a direction of shift, a shift lever for operating a synchronizing device of the transmission, the shift actuator comprising a first electromagnetic solenoid and a second electromagnetic solenoid for actuating an operation member coupled to the shift lever in the directions opposite to each other. Each of the first electromagnetic solenoid and the second electromagnetic solenoid comprises a casing, a fixed iron core disposed in the casing, a moving iron core arranged to be allowed to approach, and separate away from, the fixed iron core, an operation rod mounted on the moving iron core to engage with the operation member, and an electromagnetic coil arranged between the casing and the fixed iron core as well as the moving iron core.

Keywords: programmable, pneumatic cylinders, Solenoid valves, gear box, and gear shifting Mechanism, proximity sensor

Download Paper


DOI: 01.1617/vol4/iss5/pid95783


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA