International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,May 2017,

Topic : Automatic Flooring Machine

Authors:Durai.J || Sumit Nande, Faruk, Patil Saurabh, Sangappa

Abstract:Floor tile laying process is a finishing job usually done manually. This process is described in detail including the tile laying work flow, thinset thickness, tiles pattern, tools, tiles installation defects, costs and work rate. A cost analysis of tile laying process was made based on data obtained in one of the construction project in Langkawi in 2005. The labor cost was RM 1.50 per feet square of tiles. The material costs however vary with the quality and design of tiles. A field study was carried out to measure the work rate of manual tile installation where the average rate was 19.2seconds per tile of 300mm x 300mm. The existing research and robot technology is discussed in this research including the various configurations considered by the researchers. Based on these, important elements of floor tile laying automation were identified as lacks of data on tile laying work itself, manipulator design and costs effectiveness. We are here with new mechanized unit which can be more suitable for automation..

Keywords:

Download Paper


DOI: 01.1617/vol4/iss5/pid32908

Volume2,May 2017,

Topic : Dynamic Time Warping Music Pattern Detection

Authors:Durai.J || Sumit Nande, Faruk, Patil Saurabh, Sangappa

Abstract:Floor tile laying process is a finishing job usually done manually. This process is described in detail including the tile laying work flow, thinset thickness, tiles pattern, tools, tiles installation defects, costs and work rate. A cost analysis of tile laying process was made based on data obtained in one of the construction project in Langkawi in 2005. The labor cost was RM 1.50 per feet square of tiles. The material costs however vary with the quality and design of tiles. A field study was carried out to measure the work rate of manual tile installation where the average rate was 19.2seconds per tile of 300mm x 300mm. The existing research and robot technology is discussed in this research including the various configurations considered by the researchers. Based on these, important elements of floor tile laying automation were identified as lacks of data on tile laying work itself, manipulator design and costs effectiveness. We are here with new mechanized unit which can be more suitable for automation..

Keywords:

Download Paper


DOI: 01.1617/vol4/iss7/pid32908


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.

Journal Index Databases

IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP OTHER JOURNALS


Subscribe

           Email:

SOCIAL MEDIA