International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,June 2017,

Topic : Implementation and Testing of PCI Express IP Core using SpartaN 6 FPGA

Authors:Sandip Bhatta || Dr.Amit Sarin, Er.Rajbir singh

Abstract:This paper assesses the trans-esterification process for the production of Biodiesel (fatty acid monoalkayl ester) from waste mustard and jatropha oil mixed with methanol (CH3OH) using potassium hydroxide (KOH) as a catalyst at a temperature of 60˚C.As it is a sustainable alternative not only economically, but also environmentally and ecologically to replace petroleum diesel fuel. The most promising alternative fuel will be the fuel that has the greatest impact on society. The major impact areas include wellto- wheel greenhouse gas emissions; non-petroleum feed stocks, well-to-wheel efficiencies, fuel versatility, infrastructure, availability, economics, and safety. Compared to some of the other leading alternative fuel candidates biodiesel appears to have the largest potential impact on society, and should be considered as the fuel of choice for eliminating the dependency on petroleum. With increase in the demand of petroleum products the prices of petrol & diesel are increasing worldwide. Hence biodiesel is alternative sources of energy for running our generators; automobiles etc. are being considered worldwide. In this study, the properties of the waste mustard and jatropha biodiesel produced were compared with ASTM standard and found to be within the limits. Primarily, the utilization of these waste mustard and jatropha oil for biodiesel production will reduce dependency on foreign oil and secondly, this will remove disposal problem of waste sand make environment safe from pollution. The process involves heating of oil followed by titration, then setting and seperation and finally washing.base catalyzed transesterification process is applied.

Keywords: Transesterification; Biodiesel; Methanol; Alternate energy resource.

Download Paper


DOI: 01.1617/vol4/iss5/pid90641

Volume2,June 2017,

Topic : Synthesis and Stability Characteristics of Blend of Waste Mustard and jatropha Biodiesel

Authors:Sandip Bhatta || Dr.Amit Sarin, Er.Rajbir singh

Abstract:This paper assesses the trans-esterification process for the production of Biodiesel (fatty acid monoalkayl ester) from waste mustard and jatropha oil mixed with methanol (CH3OH) using potassium hydroxide (KOH) as a catalyst at a temperature of 60˚C.As it is a sustainable alternative not only economically, but also environmentally and ecologically to replace petroleum diesel fuel. The most promising alternative fuel will be the fuel that has the greatest impact on society. The major impact areas include wellto- wheel greenhouse gas emissions; non-petroleum feed stocks, well-to-wheel efficiencies, fuel versatility, infrastructure, availability, economics, and safety. Compared to some of the other leading alternative fuel candidates biodiesel appears to have the largest potential impact on society, and should be considered as the fuel of choice for eliminating the dependency on petroleum. With increase in the demand of petroleum products the prices of petrol & diesel are increasing worldwide. Hence biodiesel is alternative sources of energy for running our generators; automobiles etc. are being considered worldwide. In this study, the properties of the waste mustard and jatropha biodiesel produced were compared with ASTM standard and found to be within the limits. Primarily, the utilization of these waste mustard and jatropha oil for biodiesel production will reduce dependency on foreign oil and secondly, this will remove disposal problem of waste sand make environment safe from pollution. The process involves heating of oil followed by titration, then setting and seperation and finally washing.base catalyzed transesterification process is applied.

Keywords: Transesterification; Biodiesel; Methanol; Alternate energy resource.

Download Paper


DOI: 01.1617/vol4/iss6/pid90641


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.

Journal Index Databases

IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP OTHER JOURNALS


Subscribe

           Email:

SOCIAL MEDIA