International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,September 2017,

Topic : Comparative Study of the Machinability Characteristics of Nimonic C-263 Super Alloy

Authors:E. Sivakumari || S. Nishanthi

Abstract:Nickel base super alloy has the combined property of “high mechanical strength” and “High heat and corrosion resistance” at elevated temperature. This is the reason for which Nickel based super alloy are extremely used in Aircraft, Aerospace, Submarine and chemical industries. Machining of Nimonic C-263 has always been a challenging task owing to its hot strength, low thermal conductivity, tendency to work harden and affinity towards tool materials. Although coated tools have been used to overcome some of these challenges, selection of coated tool with appropriate deposition technique is of immense significance. The current study attempts to comparatively evaluate various performance parameters in machining of Nimonic C- 263 such as surface roughness, cutting force, tool temperature and tool wear. The tool materials used for this study are cubic boron nitride(CBN), ceramic and PVD coated TiAlN. To determine the effects of parameters selection on machining using Design of Experiments (DOE), Taguchi. L9 / L27 orthogonal array design of experiments was adopted to optimize the parameters. By using Taguchi and Grey Relational Analysis / Analysis of Variance (ANOVA) etc., an optimum value or the best value of surface roughness, cutting force, tool temperature and tool wear is obtained..

Keywords: Nimonic C-26, cubic boron nitride(CBN),ceramic and PVD coated TiAlN, Taguchi and ANOVA.

Download Paper


DOI: 01.1617/vol4/iss9/pid21493


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA