International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,November 2017,

Topic : Enhancing The Property Of Brass By Friction Stir Process

Authors:D Kumaravel || V.K.Bupesh Raja, Rangasamudram Anil Kumar Reddy

Abstract:Friction stir processing is an advanced machining process to improve the property of the component. This is produced by forcibly inserting a non-consumable tool into the workpiece and revolving the tool in a stirring motion as it is pushed laterally through the workpiece. This research is to improve the mechanical property of brass by coating aluminum oxide by friction stir processing. M2 the tool is used at a speed of 710 rpm and feed of 12 mm / min. Material after the process was subjected to tensile test, hardness test, salt spray corrosion test and chemical analysis. Improvement in hardness obtained in the surface composite layer. Besides, the strength of the processed brass material also increased as compared to the normal brass workpiece..

Keywords:

Download Paper


DOI: 01.1617/vol4/iss11/pid69820


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA