International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,October 2017,

Topic : Design, Modeling, FEM & Experimental Analysis of Crankshaft and Camshaft of a Passenger Car

Authors:Ketan V. Karandikar || Shailesh P. Deshpande, Sachin N. Patil, Sagar A. Deshpande, Rajendra D. Ronge

Abstract:A crankshaft can be called as the heart of any I.C. engine since it is the first recipient of the power generated by the engine. Its main function is to convert the oscillating motion of the connecting rod into rotary motion of the flywheel. The main function of a camshaft is to convert the rotary motion of the crankshaft into vertically reciprocating motion of the valves required to open and close the intake and exhaust valves of engine cylinders, with the assistance of cams located on it and an intermediate mechanism. The crankshaft is subjected to bending stress and torsional shear stress, whereas the camshaft is mainly subjected to compressive stress due to contact pressure, galling and wear and tear. This project aims at designing of I.C. engine multi crankshaft and camshaft using standard design procedures. Further, Creo software is used to create 3-D models of crankshaft and camshaft. After creating the models, the static structural analysis is performed for both of these using different materials and boundary conditions using ANSYS software. A static load testing is performed on the crankshaft and camshaft of a TATA Vista Quadrajet car using UTM and experimental stresses are compared with analytical stresses for validation purpose. Finally, the results of total deformation and equivalent (von-Mises) stresses obtained for different crankshaft materials like ASTM 100-70-03, GS-70, AISI 1045 and Inconel X-750, different camshaft materials like ASTM A532 and ASTM A536 are evaluated and compared with each other to select the best suitable material for manufacturing of crankshaft and camshaft.

Keywords: ANSYS workbench, crankshaft, camshaft, Creo, design, experimentation, finite element method, materials, modeling, static loading, stress analysis

Download Paper


DOI: 01.1617/vol4/iss10/pid59346


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2017.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2017.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2017.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2017.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2017.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2017.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2017.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2017.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA