International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume3,January 2018,

Topic : Effect of New Generation Coagulants on Properties of Industrial and Municipal Waste Water: An Overview

Authors:A. P. Katarkar || A. M. Mokadam

Abstract:Normally, industries and municipalities discharge the wastewater into open land or in water bodies without ample treatment due to which the ecosystem gets disturbed. For the treatment of wastewater, chemical coagulation is intended primarily to remove color, turbidity and chemical oxygen demand (COD) of the wastewater. For increasing the efficiency of primary treatment of industrial and municipal wastewater, better and more effective coagulants are necessary. This paper includes review of comparative studies of various coagulants such as Aluminum Chloro-Hydrate (ACH), Magnesium chloride (MgCl2), Poly-Glu, Poly-Aluminium Chloride (PACl) on laboratory scale, which can prove to be effective in enhancing the coagulation thus rendering primary treatment process of wastewaters more effective.

Keywords: Aluminum Chlorohydrate, Coagulation, Magnesium Chloride, Poly-Glu.

Download Paper


DOI: 01.1617/vol5/iss1/pid18546


Related Articles

Plastic waste Management : A Step Towards A Smart City

Authors: Mayuri Chandak || Aditi S. Pandey

Doi : 01.1617/vol4/iss3/pid21573

Volume2 ,March 2018.

Study on Penetration Resistance Using Soil Cone Penetrometer In Ploughed and Unploughed Land

Authors: K. Prasanthkumar || B. Hari Prasad, A. Jany giles , R. Jeeva, V.vishnu

Doi : 01.1617/vol4/iss11/pid98274

Volume2 ,November 2018.

Emission characteristics of a dual fueled diesel engine powered with Jatropha oil and Producer gas

Authors: B.Prashanth || Swarup Kumar Nayak. [3]C. Manisha

Doi : 01.1617/vol4/iss11/pid05623

Volume2 ,November 2018.

Experimental Investigation on Conventional Concrete by partially replacing e-Waste as A Course Aggregate

Authors: M.Christina Miracle ||

Doi : 01.1617/vol4/iss12/pid12590

Volume2 ,December 2018.

Severe Plastic Deformation of Ti-6Al-4V Alloys through Machining

Authors: Neeraj Chodankar || Sumedha S.Hunagund, Ankit K., Haldankar,Geethalakshmi K, Debasis Sen

Doi : 01.1617/vol5/iss1/pid51240

Volume3 ,January 2018.

Effect of Pattern Materials on Marginal Gap of Cast Copings Fabricated on Titanium Implant Abutment: An In-Vitro Study

Authors: Rajat R Khajuria || Rishav Singh, Sidhant Sudan

Doi : 01.1617/vol5/iss1/pid74198

Volume3 ,January 2018.

Key challenge and Deficiencies in the present Solid Waste Management System for Indian Cities

Authors: Pinki Advani || Amit Somani

Doi : 01.1617/vol5/iss2/pid15823

Volume3 ,February 2018.

Treatment of Water by using Natural Coagulant

Authors: P.S. Randive || V.P. Varghese, D.P. Singh, A.M. Badar

Doi : 01.1617/vol5/iss1/pid76045

Volume3 ,January 2018.

Watershed Modeling Using HEC-HMS and Geographical Information System

Authors: S. Mohanty || D.P. Palai, S.Pattanaik

Doi : 01.1617/vol5/iss1/pid47538

Volume3 ,January 2018.

Groundwater Flow Modelling Using Visual MODFLOW - A Case Study of Lower Ponnaiyar Sub-Watershed, Tamilnadu, India

Authors: Dr.N.Sridhar || Dr. K. Ezhisaivallabi, Dr.S.Poongothai, Dr. M. Palanisamy

Doi : 01.1617/vol5/iss2/pid30584

Volume3 ,February 2018.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA