Open Access Journal

ISSN : 2456-1290 (Online)

International Journal of Engineering Research in Computer Science and Engineering (IJERCSE)

Monthly Journal for Computer Science and Engineering

Open Access Journal

International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

ISSN : 2456-1290 (Online)

Experimental Analysis of Concrete by Replacing Aggregate with Steel Slag

Author : Sonali Gadpalliwar 1 Shraddha Kathalkar 2 Nikhil Agrawal 3

Date of Publication :24th March 2018

Abstract: The study presents the evaluation of steel slag in concrete compared to natural aggregate in concrete. Steel slag is obtained glass like product left over after the desired material has been smelted from its raw ore. It is the mixture of metal oxides and silicon di-oxides. Steel slag was selected due its characteristics which are almost similar to conventional aggregates. There are many grades of steel that can be produced, and the properties of the steel slag can change significantly with each grade. Grades of steel can be classified as high, medium, and low, depending on the carbon content of the steel. The compressive strength results obtained for specimen with steel slag was almost same as that of normal concrete specimen. Since the Steel slag is the by-product of steel industries, thus it is easily available and cheap. The main purpose of using steel slag was to save the natural aggregate and hence using the so called waste product and recycling it instead of dumping it in the environment. The study done is on M40 grade concrete with 25%, 50%, 75% and 100% replacement of conventional aggregates with steel slag and the maximum compressive strength is achieved.

Reference :

    1.  P.S.Kothai and Dr.R.Malathy, Utilization of Steel Slag in Concrete as a Partial Replacement Material for Fine Aggregates, Volume-3 Issue-4(18), April 2014.
    2. Netinger, M. Jelčić, Rukavina & D. Bjegović Mladenovič, Concrete containing steel slag Aggregate: Performance after high temperature exposure, Volume-2, Issue -3 (5), Jan-Feb 2010.
    3.  Mr. Nikhil, A. Gadge, Prof. S. S. Vidhale, Mix Design of Fibre Reinforced Concrete (FRC) Using Slag & Steel Fiber, Volume- 3 , Issue -6 (4),November-December 2013.
    4. Dr.K.Chinnaraju, V.R.Ramkumar, K.Lineesh, S.Nithya, V.Sathish, Study on concrete using steel slag as coarse aggregate replacement and eco sand as fine aggregate replacement, Volume-1 , Issue – 3(12) , June-July 2013.
    5. Magdi M. E. Zumrawi, Faiza O. A. Khalill, Experimental Study of Steel Slag Used as Aggregate in Asphalt Mixture, Volume - 9 no. 6(1), 2015.
    6.  Sonali K. Gadpalliwar, R. S. Deotale, Abhijeet R. Narde, To Study the Partial Replacement of Cement by GGBS & RHA and Natural Sand by Quarry Sand in Concrete (14)
    7. D. S. Rajendra Prasad, Effect Of Rha And Crp As Replacement Materials And Effect Of Co2 Curing Of Concrete (2)

Recent Article