International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume3,April 2018,

Topic : Advance Cooling Of Radiators by Using Nanofluids

Authors:Roheshkumar S. Lavate || Rameshwari V. Lalge

Abstract:After combustion of fuel the large heat is liberated inside the combustion chamber. The internal combustion engines are cooled by using either a liquid coolant or air. In air cooling system the air is flow over and around the cylinder, cylinder head and cylinder fins and carry away the heat. In water cooling system the coolant is circulate through a water jacket of cylinder head and cylinder wall. This coolant has absorb heat from the engine and dissipated to atmosphere by the device known as radiator. The Radiator contains number of horizontal tubes surrounded with fins. The heat is carry away by three modes of heat transfer namely Radiation, conduction and convection. Most of the convection takes place because of air flowing around the radiator fin and tube assembly and Conduction takes places between radiator tubes and fins. These coolant offer low thermal conductivity and poor heat transfer characteristics. There is large scope to design a high energy efficient, compact and light in weight automobile radiator by development of advanced nanofluids, which have better conduction and convection thermal properties and better heat transfer characteristics. This paper will introduce new concept of radiators that can adopt the high performance nanofluids. This advance cooling system also raises the total mechanical efficiency of the engine.

Keywords: Cooling, Heat Transfer, Nanofluids, Radiator, Thermal Conductivity

Download Paper


DOI: 01.1617/vol5/iss4/pid16340


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2018.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2018.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2018.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2018.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2018.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2018.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2018.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2018.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2018.


Call for Papers


Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA