International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume3,June 2018,

Topic : Mechanical Properties of A Ti -Xnb-3.5sn Alloy Synthesized by Mechanical Alloying and Cold Isostatic Pressure

Authors:Abdel-Nasser Omran || Mohammed Y. Abdellah, Soltan Ghanim Al-Fadli

Abstract:A developed -Ti-xNb-3.5%Sn (wt%) alloy was synthesized by mechanical alloying of high energy ball milled powders and powder consolidation with cold isostatic pressure (CIP). The starting powder materials were as mixed powders and powders were produced by high energy ball milling (HEBM) for 1 hr, 2 hr, and 4 hr respectively. The bulk solid samples were fabricated by the (CIP at the temperature of 900-1050 oC for 2 hrs. It was found that the Ti was completely transformed from   phase after milling for 4 hr in the powder state, and almost transformed to -Ti phase with the sintered specimen at 1000 oC. The homogeneity of the sintered specimen increases as the milling time, Nb contents, and sintering temperature increase. Also, the hardness of the sintered alloys increases as the increase of sintering temperature, Nb contents and milling time, reached to a value of 400 HV with 4 hr milling time. The Young's modulus is almost constant for all sintered Ti-x%Nb-3.5%Sn specimens at different milling time. Young's modulus is law (62.-66Gpa) compared to the standard alloy of Ti-6Al-4V about (110 Gpa). .

Keywords: Biomedical materials, Ti-Nb-Sn alloys,  titanium, mechanical alloying, mechanical properties, Young’ Modulus.

Download Paper


DOI: 01.1617/vol5/iss6/pid62348


Related Articles

RFID Technology in Construction Project Management – A Review

Authors: Rounak Bhushan Singh || Sumeet Sagar,Animesh Sinha,Muneesh Methwani

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2018.

RFID Technology in Construction Project Management – A Review

Authors: S.Pachaiappan || Dr.S.Palanivel

Doi : 01.1617/vol4/iss03/pid49278

Volume2 ,March 2018.

Experimental Study of Steel Fibers Reinforced Concrete over Conventional Concrete

Authors: Varsha Harne || Suyog U. Dhote

Doi : 01.1617/vol4/iss03/pid83154

Volume2 ,March 2018.

Experimental Investigations of Rubber Seed Oil Methyl Ester-Diesel and Butanol-Diesel Blend by Using Diesel Engine

Authors: Vishal V. Patil || Utkarsh Shidhganesh,Somesh Shinde,Mahesh Gurav,Swapnil Ulagadde

Doi : 01.1617/vol4/iss2/pid72430

Volume2 ,February 2018.

Study of Land Acquisition Issues causing delay of NHAI Projects

Authors: Rounak Bhushan Singh || SumeetSagar, Animesh Sinha

Doi : 01.1617/vol4/iss4/pid73465

Volume2 ,April 2018.

Study on Strength and Durability Properties of Bacteria Concrete

Authors: Phani Kumar. V || V. Sainath,Ashok Varma

Doi : 01.1617/vol4/iss3/pid03875

Volume2 ,March 2018.

Influence of Masonary Infill on The Behaviour of RC Frames

Authors: R.Vigneshwaran || Dr.K.Pandurangan

Doi : 01.1617/vol4/iss3/pid01729

Volume2 ,March 2018.

Design of Smart Rolling Shutters for Low Cost Operations

Authors: Kushali Sindhia || Madhumitha Prakash,Dr. S. V. Satish

Doi : 01.1617/vol4/iss3/pid49615

Volume2 ,March 2018.

An Experimental Investigation on Behavior of High Volume Alkali Activated Flyash Concrete

Authors: K.Sasidhar || S. Aruna Jyothy,Dr. B. Damodhara Reddy

Doi : 01.1617/vol4/iss3/pid64813

Volume2 ,March 2018.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA