International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,June 2016,

Topic : Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors:T Rao Surtani || Sathish Kumar .G

Abstract:The objective of the present work is to design an automotive manual transmission shaft for its better performance with the optimal weight. Increase in their inertia plays a major role in the more weight. Therefore it must be strong enough to bear the needs, whilst avoiding too much additional weight as that would. So here the work deals with the optimization are performed based on the design constraints such as natural frequency (resonant condition) and static strength which are subjected to torque. The local and Global Sensitivity analysis and optimization on the best among material is done to optimize the constraint in the aim to get minimum weight and stress. The numerical methods, used are genetic algorithm .The commercial FEA solvers are used for the numerical investigation. Finally the weight and stress optimized for different materials are compared with the PPT with CNT 0.05%. Hence results revealed that the PP with CNT 0.05 % has the better result than other which are considered..

Keywords: automotive manual transmission shaft, design variables, genetic algorithm, CNT

Download Paper


DOI: 01.1617/vol1iss2pid001222


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2016.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2016.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2016.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2016.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2016.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2016.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2016.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2016.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2016.

Ranking Strength And Threats Of Implementing Sustainble Supply Chain Management In Thermal Power Plants Of India By Vikor Analysis

Authors: Suchismita Satapathy || Jitendra Narayan Biswak, Pravudata Mishra

Doi : 01.1617/vol1iss2pid001230

Volume1 ,June 2016.

Journal Index Databases

IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP OTHER JOURNALS


Subscribe

           Email:

SOCIAL MEDIA