International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,December 2016,

Topic : 3D Printing Technology or Additive Manufacturing System

Authors:Girish Anil Patil || Siddhesh Sharad Chaskar,Himani Mahesh Limaye,Bhavesh Sheth, Prof.M.V.Shivramwar, Prof.N.B.Chaudhari

Abstract:Manufacturing system is a method of organizing product from the availability of raw material from start to the final output subtractive manufacturing is a type of production in which metal removal takes place by various methods like drilling, milling, cutting, etc. But in this era of 20th century we have in manufacturing system called additive manufacturing it is in its initial stage till end of 20th century and is known by prototype manufacturing which has now become 3D printing technology it is a rapid and reliable process. The main difference in subtractive and additive manufacturing system is that in subtractive material removal takes place while in additive material addition takes place by layers to form the final product. This additive manufacturing system or 3D printing technology will become the fastest and most accurate method of production till 21st century and will be used by almost all the manufacturing industries in the world. As being a simple process i.e. just upload the 3D design of the model in the system and the 3D printing machine will make the 3D model of the product by applying number of layers of the required material till the final dimension of the product is achieved. Material used in formation of product may be plastics, metal but there are limitations not all metals can be used selective metals are used A brief information on this technology is being discussed in the paper..

Keywords: Additive manufacturing, 3D Printing Technology, Product Formation by Layers

Download Paper


DOI: 01.1617/vol1iss8pid001312


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2016.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2016.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2016.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2016.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2016.

Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors: T Rao Surtani || Sathish Kumar .G

Doi : 01.1617/vol1iss2pid001222

Volume1 ,June 2016.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2016.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2016.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2016.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2016.

Journal Index Databases

IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP OTHER JOURNALS


Subscribe

           Email:

SOCIAL MEDIA