International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,December 2016,

Topic : Design and Development of Image Processing Based Automated Tool Insert Sorting System

Authors:Prof.S.A.Soundattikar || Prasad Velankar,Namdev Nalawade, Vipul Jadhav,Anand Savakare

Abstract:In the constantly changing manufacturing world, passion for metal cutting is crucial to stay ahead. Cutting tools are often designed with inserts or replaceable tips (tipped tools). In these, the cutting edge consists of a separate piece o f material, brazed, welded or clamped on to the tool body. They are usually indexable and low cost. This saves time in manufacturing by allowing fresh cutting edges to be presented periodically without the need for tool grinding, setup changes and without changing the programs. Different tool inserts are used for various applications and could be of various shapes like diamond, square, hexagon, triangle, round, octagon, etc. The incoming tool inserts could be sorted based on various shapes, dimensional accuracy, orientation and that if they are used or unused tool inserts. The sorting process consists of use of Image processing to grab the image of the inserts and then processing it through MATLAB software. The software will process the image for above said parameters and results would be generated on screen. A complete database for a given tool insert will also be generated and be available to the user whenever required and then the inserts would be placed in the respective bins. This paper presents a review on need of sorting tool inserts, various methods used for the same and methodology used for the automated sorting of tool inserts.

Keywords: Tool Inserts, Image Processing, Microcontroller, MATLAB

Download Paper


DOI: 01.1617/vol1iss8pid001317


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2016.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2016.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2016.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2016.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2016.

Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors: T Rao Surtani || Sathish Kumar .G

Doi : 01.1617/vol1iss2pid001222

Volume1 ,June 2016.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2016.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2016.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2016.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2016.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA