International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,December 2016,

Topic : Investigation of Sol-Gel Method of Coating Nanoparticles (TiO2) Manufacturing Process by using Design of Experiment

Authors:Priyanka Rajesh Andhale || Dr.Mariappan Dharmaraj Nadar

Abstract:The nanoparticles of Titanium dioxide coatings has good thermal and electrical conductive properties and these nanoparticles are resistant to oxidation, consumption, disintegration, scratch safe and wear in high temperature situations. This property is essential element in the applications of pipelines, castings and automobile industry.The major contribution of the project work is to develop composite materials and enhance the anticorrosion property & increase the life of automobile components materials by using Titanium dioxides nanoparticles were synthesized by using metal alkoxide (Titanium tetraisopropoxide) by sol-gel method. The optimization of process parameter is obtained by using the response surface method (RSM) based on central composite design (CCD).By using Design Expert 9 software find significant values based on ANOVA Table. Based on particle size and antimicrobial activity, the optimized parameters were fixed. Titanium dioxide nanoparticle sol is mixed with paint in different proportions (% v/v) and coating is performed on different metal plates. The performance of coating is tested for smoothness and anticorrosion properties. Last 40 years has major change takes place in coating industry by using new coating technology. Coating gives two main important uses like decoration and protection. In this investigation, the uniform nanoparticle coating of titanium dioxide has been applied on mild steel and Aluminum by using spray coating technique. The coating substrates are placed in salt spray chamber for corrosion test..

Keywords: Coating, Process optimization, Response surface methodology, Sol-gel method

Download Paper


DOI: 01.1617/vol1iss8pid001323


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2016.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2016.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2016.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2016.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2016.

Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors: T Rao Surtani || Sathish Kumar .G

Doi : 01.1617/vol1iss2pid001222

Volume1 ,June 2016.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2016.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2016.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2016.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2016.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA