International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,May 2016,

Topic : Experimental Investigation on Glass Fibre Reinforced Concrete

Authors:V.Anjali Kumar || B.Chandra Kiran Kumar Reddy,G.Bhanu Prakash

Abstract:Concrete possesses a very low tensile strength, limited ductility and little resistance to cracking by adding glass fibres into concrete can dramatically increases tensile strength and also compressive strength. Glass fibre reinforced concrete will shows considerable improvement in durability when compared to conventional concrete. We can also use plasticizer as “GELENIUM SKY 8234” to reduce water content and increases workability. The main aim of this study is to compare the test results between conventional concrete and glass fibre reinforced concrete. In this study concrete mix design is done for M30 grade concrete. The strength results were compared by addition glass fibres in concrete mixture of different proportions 0%, 0.5% and 1% by weight of cement, the cubes are prepared for different sizes of 150mm X 150mm X 150mm for compression and 100mm X 100mm X 100mm for tension. The curing will be done for 7, 28 days. Finally the strength performance of glass fibred reinforced concrete is compared with normal concrete..

Keywords: Compressive Strength, concrete, Fiber Reinforced Concrete, Glass Fibers, Tensile Strength etc….

Download Paper


DOI: 01.1617/vol1iss1pid001148


Related Articles

Experimental Investigation On Steel Fiber Concrete Using Plastics

Authors: S.Manju Soniya || J.Balaji Praveen

Doi : 01.1617/vol1iss2pid001214

Volume1 ,June 2016.

Seismic Performance of RC Structural Walls with Slits: Analytical Study

Authors: Athulya Das A S || Sajith A S

Doi : 01.1617/vol1iss2pid001216

Volume1 ,June 2016.

Experimental Studies on Axially Loaded Fiber Reinforced Circular Column

Authors: Bharathi.N || Vinod Kumar M, Muthu Kannan.M

Doi : 01.1617/vol1iss2pid001221

Volume1 ,June 2016.

An Experimental Study on Mechanical Properties of Steel Fiber Reinforced Self Curing Concrete

Authors: J.Balaji Praveen || S. Manju Soniya

Doi : 01.1617/vol1iss2pid001223

Volume1 ,June 2016.

Design and Development of an Injection Molded Prosthetic Polycentric Knee Joint for Amputee

Authors: K R Yuwaraj || D Saravanan

Doi : 01.1617/vol1iss2pid001224

Volume1 ,June 2016.

Modeling and Analysis of Prosthetic Lower Limb for Artificial Limb Applications

Authors: Sidharth Goutam Dash || Dr. Sivanandan K.S.

Doi : 01.1617/vol1iss2pid001229

Volume1 ,June 2016.

Simulation of Crash Landing Of Aircraft Structures –A Review

Authors: Praveen Banakar || Dr. Kiran Kamath

Doi : 01.1617/vol1iss2pid001231

Volume1 ,June 2016.

Effectiveness of Rebar Coatings against Corrosion

Authors: Prafull Yenape || Shilpa V. Pati

Doi : 01.1617/vol1iss2pid001233

Volume1 ,June 2016.

Effect of Corrosion on Flexural Behaviors Of RC Beam

Authors: Riyas. R. R || Shilpa. V. Patil

Doi : 01.1617/vol1iss2pid001234

Volume1 ,June 2016.

Crack Classification in Notched Concrete Beams using Acoustic Emission Technique

Authors: Rubina R. Mulla || Shilpa V. Patil

Doi : 01.1617/vol1iss2pid001235

Volume1 ,June 2016.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA