International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume1,July 2016,

Topic : Investigation of SS 321 & Mechanical Properties

Authors:G. Thiru Murugan || S. Tamilzhazagan,D. Thulasimani,S. Vimalkumar

Abstract:This work aims at the analysis and optimization of joining similar grades of stainless steel by an arc welding. The parameters like current, filler materials, welding speed are the variables in this study. The mechanical properties and microstructure of 321 austenitic stainless steel welds are investigated, by using stainless steel filler material of different grades. Often in many product forms, the grain size and carbon content can meet both the 321S and 321H requirements.321 is often used at cryogenictemperatures, with excellent toughness to 450°F, and low magnetic permeability. 321 have a machinability rating of 42% relative to AISI B1112 steel. In this project the comparative study between normal welding and welding procedure specification is made for stainless steel grade 321 material by comparing its mechanical properties after welding.

Keywords: High Volume Air Sampler, National Ambient Air Quality Standards, Sound Meter, Suspended Particulate Matter (SPM)

Download Paper


DOI: 01.1617/vol1iss3pid001163


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2016.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2016.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2016.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2016.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2016.

Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors: T Rao Surtani || Sathish Kumar .G

Doi : 01.1617/vol1iss2pid001222

Volume1 ,June 2016.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2016.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2016.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2016.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2016.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA