International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE)

Monthly Journal for Mechanical and Civil Engineering

Volume2,February 2017,

Topic : Investigation of Heat Transfer Co-Efficient in Cylindrical Shaped PIN-FINS

Authors:Sharad N. Koyale || Ruturaj N. Londhe,Vaibhav G. Talandage

Abstract:Pin-fin heat sinks show their great merits of thermal management in high heat flux devices in micro-electronics, energy and aerospace and in heat exchange equipment. Compact heat transfer mechanism is needed to remove the heat flux and increasing heat transfer rate. In this study, three cylindrical pin-fins with different materials i.e. mild steel, brass and aluminium are of same sizes studied experimentally with forced heat transfer technique. How the efficiency and heat transfer rate are affected by the changing in Reynolds number. Heat transfer coefficient changes by changing the material and flow properties, result in an increasing heat transfer rate over the plane channel. This study is to experimentally examine the effect of cylindrical pin-fins of brass, aluminium and mild steel on the heat transfer rate at various Reynolds number with considerable practical importance..

Keywords: Pin-fin, heat transfer coefficient, Reynolds number

Download Paper


DOI: 01.1617/vol2iss2pid001393


Related Articles

Analyzing the Effect of Various Piston Bowl Geometries on the Different Parameters of Engine

Authors: Varahagiri V S J Bhaskar || Dr.Mohammad Israr,Dr.D.Maruthi Rao,Riyaj Y. Mujawar, Sudhakar P. Wankhade

Doi : 01.1617/vol1iss2pid001215

Volume1 ,June 2017.

ORGANISATION OF COMMON VOSS ASEMBLY STATION FOR AUTOMOTIVE BRAKING VALVES WITH POKA-YOKE

Authors: ANUJ KUMAR SHRIVASTAVA || MAHESH SHAHAPURE, DR. CHANDRABABU D

Doi : 01.1617/vol1iss2pid001217

Volume1 ,June 2017.

CFD and Experimental Studies of Heat Transfer and Pressure Drop in a Tube Equipped With Drilled Twisted Tape Inserts

Authors: Sagar V Patil || Prof.. D.G. Kumbhar

Doi : 01.1617/vol1iss2pid001218

Volume1 ,June 2017.

Design and Experimental Analysis OFA Floating Type Sea Wave Energy Harvester with Permanent Magnet Fixed Circular Disc

Authors: Manoj.T || Dr.K.Maniysundar, Suresh.G,Arun.S.J,Jebin.N

Doi : 01.1617/vol1iss2pid001219

Volume1 ,June 2017.

Nan Particles for Efficient Photo Catalysis: A Review

Authors: Saransh Jain || Vatshal Bhanushali

Doi : 01.1617/vol1iss2pid001220

Volume1 ,June 2017.

Design and Development of Nano Composite Based Automotive Manual Transmission Shaft for LCVS

Authors: T Rao Surtani || Sathish Kumar .G

Doi : 01.1617/vol1iss2pid001222

Volume1 ,June 2017.

Investigation of Variability of Cylinder Head Machine Process

Authors: Shivraj S. Zambare || M.V.Kavade

Doi : 01.1617/vol1iss2pid001225

Volume1 ,June 2017.

Effect Of B4C Particulate Reinforcement On Mechanical Behaviour Of Al7010 Alloy

Authors: Shashidar K Naik || S J Sanjay

Doi : 01.1617/vol1iss2pid001226

Volume1 ,June 2017.

Advanced Automatic Feed Mechanism in Shapers Using Microcontrollers

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001227

Volume1 ,June 2017.

Generation of Electricity by Human Motion Using Piezoelectrics

Authors: Gowtham.S ||

Doi : 01.1617/vol1iss2pid001228

Volume1 ,June 2017.



Editor-in-chief

Editor Image

Editor-in-Chief
Meinhard Taher Schobeiri
Professor,
Texas A & M University, USA.

View more


IMPACT FACTOR: 3.8

ISSN(Online): 2456-1290

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJERMCE
Electronic ISSN : 2456-1290
Impact Factor : 3.8
Frequency : monthly
Contact : info@ijermce.com

IFERP Other Journals


Subscribe

           Email:

SOCIAL MEDIA