1. 1. X. Gao, Q. L. Yu, and H. J. H. Brouwers, “Characterization of alkali activated slag-fly ash blends containing nano-silica,” Constr. Build. Mater., vol. 98, pp. 397–406, 2015.
   2. M. D. A. Thomas, “Optimizing the Use of Fly Ash in Concrete,” Portl. Cem. Assoc., p. 24, 2007
   3. Z. Liu, S. M. Asce, X. Yu, and M. Asce, “Multiscale Chemico-Thermo-Hydro-Mechanical Modeling of EarlyStage Hydration and Shrinkage of Cement Compounds,” J. Mater. Civ. Eng., vol. 27, no. September, pp. 1239–1247, 2013
   4. K.-H. Yang and J.-K. Song, “Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide,” J. Mater. Civ. Eng., vol. 21, no. 3, pp. 119–127, 2009.
   5. D. Wang, Q. Wang, and Z. Fang, “Influence of alkali activators on the early hydration of cement-based binders under steam curing condition,” J. Therm. Anal. Calorim., vol. 130, no. 3, pp. 1801–1816, 2017.
   6. R. Vinai, A. Rafeet, M. Soutsos, and W. Sha, “The Role of Water Content and Paste Proportion on Physicomechanical Properties of Alkali Activated Fly Ash–Ggbs Concrete,” J. Sustain. Metall., vol. 2, no. 1, pp. 51–61, 2016.
   7. B. Singhi, A. I. Laskar, and M. A. Ahmed, “Investigation on Soil–Geopolymer with Slag, Fly Ash and Their Blending,” Arab. J. Sci. Eng., vol. 41, no. 2, pp. 393– 400, 2016.
   8. R. Siddique and M. I. Khan, “Ground granulated blast furnace slag,” Suppl. Cem. Mater., pp. 121–173, 2011.
   9. G. Mallikarjuna Rao and T. D. Gunneswara Rao, “Final Setting Time and Compressive Strength of Fly Ash and GGBS-Based Geopolymer Paste and Mortar,” Arab. J. Sci. Eng., vol. 40, no. 11, pp. 3067–3074, 2015.
   10. C. H. Sung, R. Huang, C. J. Tsai, Y. H. Wu, W. T. Lin, and T. L. Weng, “Application on cementitious materials to promote durability of alkali-activated concrete containing co-fired fly ash and water-quenched slag,” Monatshefte fur Chemie, vol. 148, no. 7, pp. 1349–1354, 2017.
   11.  A. Wardhono, D. W. Law, and A. Strano, “The strength of alkali-activated slag/fly ash mortar blends at ambient temperature,” Procedia Eng., vol. 125, pp. 650–656, 2015.