1. 1. K. V. Wong and A. Hernandez, “A Review of Additive Manufacturing,” ISRN Mech. Eng., vol. 2012, pp. 1–10, 2012, doi: 10.5402/2012/208760.
   2. J.-P. Kruth, M. C. Leu, and T. Nakagawa, “Progress in Additive Manufacturing and Rapid Prototyping,” CIRP Ann., vol. 47, no. 2, pp. 525–540, 1998, doi: 10.1016/S0007-8506(07)63240-5
   3.  N. Li et al., “Progress in additive manufacturing on new materials: A review,” J. Mater. Sci. Technol., vol. 35, no. 2, pp. 242–269, Feb. 2019, doi: 10.1016/j.jmst.2018.09.002
   4.  S. Liu and Y. C. Shin, “Additive manufacturing of Ti6Al4V alloy: A review,” Mater. Des., vol. 164, p. 107552, Feb. 2019, doi: 10.1016/j.matdes.2018.107552
   5. B. Vayre, F. Vignat, and F. Villeneuve, “Designing for Additive Manufacturing,” Procedia CIRP, vol. 3, pp. 632–637, 2012, doi: 10.1016/j.procir.2012.07.108.
   6. D. Ahn, H. Kim, and S. Lee, “Surface roughness prediction using measured data and interpolation in layered manufacturing,” J. Mater. Process. Technol., vol. 209, no. 2, pp. 664–671, Jan. 2009, doi: 10.1016/j.jmatprotec.2008.02.050.
   7.  Y. Zhao, K. Zhao, Y. Li, and F. Chen, “Mechanical characterization of biocompatible PEEK by FDM,” J. Manuf. Process., vol. 56, pp. 28–42, Aug. 2020, doi: 10.1016/j.jmapro.2020.04.063.
   8. A. Pandzic, D. Hodzic, and A. Milovanovic, “Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process,” in DAAAM Proceedings, 1st ed., vol. 1, B. Katalinic, Ed. DAAAM International Vienna, 2019, pp. 0545–0554.
   9. S. H. Huang, P. Liu, A. Mokasdar, and L. Hou, “Additive manufacturing and its societal impact: a literature review,” Int. J. Adv. Manuf. Technol., vol. 67, no. 5–8, pp. 1191–1203, Jul. 2013, doi: 10.1007/s00170-012-4558-5.
   10. N. Guo and M. C. Leu, “Additive manufacturing: technology, applications and research needs,” Front. Mech. Eng., vol. 8, no. 3, pp. 215–243, Sep. 2013, doi: 10.1007/s11465-013-0248-8.