1. 1.  M.L. Munjal, Acoustics of ducts and mufflers with application to exhaust and ventilation system design, John Wiley & Sons, 1987
   2. M.L. Munjal, Plane wave analysis of side inlet/outlet chamber mufflers with mean flow, Appl. Acoustics, 52, pp.165–175, 1997
   3. M.B. Xu, A. Selamet, I.J. Lee, N.T. Huff, Sound attenuation in dissipative expansion chambers, J. Sound Vib. Vol. 272,pp. 1125–1133, 2004
   4. T W Le Roy, Muffler characterization with implementation of the finite element method and experimental techniques Michigan Technological University, 2011
   5.  A. Elsayed, C. Bastien, H. Medina, S. Jones, H. Kassem, Enhancing Noise Attenuation in Exhaust Mufflers on Response to Baffle Configuration, Int. J. Eng. Manuf.vol 7 pp. 12–25, 2017
   6. U. Kalita, M. Singh, Design and CFD analysis of flow through a reactive muffler of four cylinder diesel engine, recent trends in Engg. Design, Lecture Notes of Mechanical Engg,pp. 211-223, 2021
   7. P.O.A.L. Davies, R.J. Alfredson, Performance of Exhaust Silencer, J. Sound Vib. Vol. 15, pp.175–196, 1971
   8.  D. Potente, General design principles for an automotive muffler, Annu. Conf. Aust. Acoust. Soc. 2005, Acoust. Chang. Environ., pp. 121–126, 2005
   9.  O.Z. Mehdizadeh, M. Paraschivoiu, A three-dimensional finite element approach for predicting the transmission loss in mufflers and silencers with no mean flow, vol 66, pp. 902–918, 2005
   10. M.L. Munjal, Recent advances in muffler acoustics, Int. J. Acoust. Vib, vol. 18, pp.71–85, 2013
   11. V. Sherekar, P.R. Dhamangaonkar, Design principles for an automotive muffler Int. J. Appl. Eng. Res, Vol. 9 pp. 483– 489,2014
   12. S. Balamurugan, N. Jeyaprakash, K. Manikandan, Design and Fabrication of Muffler for Four Stroke Diesel Engine, Int. J. Sci. Eng. Technol. Vol. 4, pp. 136–140, 2015
   13. A. Ahmed, Design and construction of absorption type muffler and compare it with engine ’ s existing muffler prepared by, (n.d.)
   14. ] P. Saripalli, CFD Analysis on Flow Through a Resistance Muffler of LCV Diesel Engine, Int. J. Sci. Technol. Soc. Vol. 3, 2015
   15. P. Srinivas, V.R. Mamilla, G. Lakshmi, N. Rao, M. Ahmed, Design and Analysis of an Automobile Exhaust Muffler, Ind. Syst. Eng. Vol 1, pp.10–15, 2016
   16. G. Gnanendhar Reddy, N. Prakash, Design and fabrication of reactive muffler, Int. J. Chem. Sci. Vol.14, pp.1069–1076, 2016
   17. V.D. Prajapati, Design and Analysis of Automotive Muffler, Vol 5, pp. 384–389, 2016
   18. M.R. R, Components That Influence Airflow Out of the Engine Are As Three-Way,Int. J. Automob. Eng. Res. Dev.Vol. 2, pp. 11–21, 2012
   19. P.V. Lokhande, Design Analysis of Exhaust Muffler With VOC Emission Filter,Int. Res. J. Eng. Technol. pp. 699–709, 2012
   20.  20. J.H. Chaudhri, P.B.S. Patel, P.S.A. Shah, Muffler Design for Automotive Exhaust Noise Attenuation - A Review, Vol 4, pp. 220–223, 2014
   21.  U. Kalita, M. Singh, Optimization of a reactive muffler used in four-cylinder petrol engine into hybrid muffler by using CFD analysis, Materials Proceeding Today, (2021) [22] N. Patil, S. Chaudhary, CFD analysis of exhaust backpressure for four-stroke ciengine, Vol.3,pp. 247–252, 2018.