International Journal of Engineering Research in Electronics and Communication Engineering

Heat Transfer Performance of Cylinder Block with Fin for Perforated Fins and Various Materials

Author : Govind Yadav ¹ B.K.Chourasia ² Deepak Sahu ³

Date of Publication :3rd August 2022

Abstract: In the IC engine, the combustion takes place in the engine cylinder block from the mixing of air-fuel. And after burning of air-fuel in cylinder block the temperature distribution takes place and this process goes continuously. The heat transfer depends upon the velocity of the air, ambient temperature, the geometry of the fin, and the surface of the fin. Throughout most cases, the design of the system restricts heat transfer across fins. The principle of convection and conduction is utilised to cool various structures through fins. Numerical simulations are carried out for two different fin materials: AL 2014 T6 and AL6061 T6. The heat transfer effect may be varied by changing geometry and changing material for different thermal conductivities, using perforations on the fin.The maximum temperature drop is 25.87 0C with holes and maximum total Heat flux is 440.11 w/m2.The design of the model is done in CATIA V5 software and thermal analysis is done in ANSYS R19.

Reference :

1. Internal combustion engines, 4thedition, V. Ganeshan.
2. J P Hollman (2010).Heat transfer,( The McGraw-Hill international editions).
3. Obula Reddy Kummitha, B.V.R. Reddy, "Thermal Analysis of cylinder block with fins for different materials using ANSYS", Materials Today: Proceedings,2017, 8142–8148.
4. Gyanendra Dhakar1, Deepak Sahu2 “ Heat Transfer Enhancement of Cylinder Block With Fins For Various Materials And Perforation In Fins” Solid State Technology Volume: 63 Issue: 6 Publication Year: 2020.
5. Chandrakant R Sonawane, PratyushRath, Nishant Vats, “Numerical simulation to evaluate the thermal performance of engine cylinder Fins: Effect of fin geometry and fin material” Materials Today: Proceedings,2021, 2214-7853.
6. PulkitSagar, PuneetTeotiu, Akash Deep Sahlot, "Heat transfer analysis and optimization of engine fins of varying geometry", Materials Today: Proceedings, 2017, 8558–8564.
7. G. Babu, M. Lavakumar,Heat Transfer Analysis and Optimization of Engine Cylinder Fins of Varying Geometry and Material, Journal of Mechanical and Civil Engineering (IOSR-JMCE, Volume 7, Issue 4 (Jul. - Aug. 2013), PP 24-29.
8. Srinivas, Thalla. santoshkumar, V suresh, Eshwaraiah, "Thermal Analysis and optimization of engine cylinder fins by varying geometry and material", 1st International Conference on manufacturing, material science & engineering 2019.
9. PulkitSagar, PuneetTeotiu, Akash Deep Sahlot “Heat transfer analysis and optimization of engine fins of varying surface roughness” Materials Today: Proceedings 2017,8565–8570.
10. S.K. Mohammad Shareef, M SaiVikas, “Design and thermal analysis of engine cylinder finbody using various fin profiles” Materials Today: Proceedings.
11. ChidiebereOkeke-Richard, Sunny Sharma, “Thermal Analysis and Comparison of Cylinder Blocks of 4S, SI Two-Wheeler Engine Using Ansys", International Journal of Innovative Science, Engineering & Technology, Vol. 3 Issue 5, May 2016
12. D. Madhavi, D. Dev Singh, "Design and Thermal Analysis on Engine Cylinder Fin by Varying Fin Material", International Journal & Magazine of Engineering, Technology, Management and Research, July 2018.
13. Mahendra Kumar Ahirwar, Ravindra Mohan, Jagdish Prasad, "I.C. Engine Cylinder Fins Transient Thermal Analysis by Using ANSYS Software", International Research Journal of Engineering and Technology (IRJET), Volume 05, Issue: 02, Feb-2018.